S
Sony Ericsson M608
Reset & recovery guide · Phone · Symbian 9.1, UIQ 3.0
Phone

Sony Ericsson M608 — Hard Reset, Factory Reset & Recovery Mode Guide

🔧

Hard Reset via Recovery — Sony Ericsson M608

Optimized for M608 (Symbian 9.1, UIQ 3.0)

⚠️ A hard reset erases ALL data (apps, photos, accounts). Back up first.
1
Sony Ericsson M608 runs Symbian 9.1, UIQ 3.0, which resets through a dial code rather than a button combo.
2
From the home screen, dial *#7370# and confirm.
3
Enter the phone lock code when prompted — the default on most Symbian phones is 12345 unless you changed it.
4
The device restarts and wipes user data, similar to a factory reset.
5
If *#7370# doesn't work on your specific model, use the in-menu Factory Reset method below instead.
📱

Factory Reset from Settings — Sony Ericsson M608

Optimized for M608 (Symbian 9.1, UIQ 3.0)

⚠️ Permanently deletes personal data. Make sure backups are saved.
1
Open the Settings/Tools menu on your Sony Ericsson M608 (running Symbian 9.1, UIQ 3.0).
2
Look for "Restore factory settings" (naming varies: S60 devices often list it under Settings > General > Restore Factory Settings).
3
Choose "Delete all" if you want a full data wipe rather than just settings.
4
Enter your security code when prompted (default is 12345 unless changed).
5
Confirm — the device restarts with a clean setup.
🛠️

Enter Recovery Mode — Sony Ericsson M608

Optimized for M608 (Symbian 9.1, UIQ 3.0)

✅ Safe to enter — this does not erase any data.
1
There's no standardized "recovery mode" screen on Symbian 9.1, UIQ 3.0 the way there is on Android or iOS.
2
Restarting or soft-resetting your Sony Ericsson M608 (hold Power for 10+ seconds, or use the reset pinhole if your model has one) is the closest safe equivalent.
3
For persistent issues, use the Factory Reset method above instead.
🔒

Lock Screen / Reset Notes — Sony Ericsson M608

Optimized for M608 (Symbian 9.1, UIQ 3.0)

For legal owners only. Do not use on lost or stolen devices.
1
Factory Reset Protection (FRP) is a Google/Android security feature and doesn't apply to Sony Ericsson M608 (Symbian 9.1, UIQ 3.0).
2
Most non-Android platforms don't lock the device to an account after a reset.
3
If your Sony Ericsson M608 does prompt for a security code after reset, check Sony Ericsson's support site for their specific unlock process.

Why reset your Sony Ericsson M608?

A hard reset on the Sony Ericsson M608 fixes boot loops, forgotten PINs and persistent lag. Using Volume Up + Power, you can access recovery mode and wipe the device back to factory condition. Always back up your data first, as a reset cannot be undone.

Frequently asked questions

Will a hard reset delete everything on my Sony Ericsson M608?

Yes. A hard reset (also called a factory reset) erases all apps, photos, messages, and accounts, returning the Sony Ericsson M608 to its out-of-box state. Back up anything you want to keep before starting.

Does resetting the Sony Ericsson M608 remove the SIM lock or carrier lock?

No. A hard or factory reset only clears data and settings — it doesn't remove a carrier/SIM lock, which is tied to the device's IMEI at the network level. You'd need to contact your carrier for an unlock.

How long does a factory reset take on the Sony Ericsson M608?

Typically a few minutes, though it can take longer on older or heavily used devices as more stored data has to be wiped.

Does the Sony Ericsson M608 lock to an account after a reset?

Usually not — Factory Reset Protection (FRP) and Activation Lock are Android and iOS features. Most other platforms, including this device's, don't add an account lock after a reset.

Other Sony Ericsson reset guides

Sony Ericsson A8iSony Ericsson J300Sony Ericsson Mix WalkmanSony Ericsson T650Sony Ericsson W710Sony Ericsson Xperia Pureness